Bespoke Wood Flooring

Bespoke wood flooring is designed around the individual space rather than selected from a fixed range of patterns, sizes or finishes. The timber, proportions, geometry, direction, borders and decorative details can all be developed around the architecture of the room, the character of the property and the way the customer wants the finished floor to look.

Projects can incorporate different timbers or combinations of species, individually sized parquet, herringbone and chevron, geometric patterns, contrasting borders, inlays, medallions, curved borders, hand-scraped flooring and other custom details. New or reclaimed timber can be used where appropriate, with the choice of material, scale, colour and finish developed as part of the overall design.

Where required, the floor can be developed as a completely individual design from the ground up — with its own pattern, proportions, timber combination and detailing, made by hand rather than selected from a standard manufactured range. This allows the finished floor to be genuinely specific to that property rather than a variation of something already available elsewhere.

Some projects begin with a particular pattern, timber or reference; others start with the room itself and are developed from there. The finished floor can then be made, installed, sanded and finished on site as one complete design.

This floor was developed as an individual design rather than taken from an existing parquet pattern. The size of the individual blocks and the proportions of the repeating geometry were calculated around the dimensions of the room so that the pattern finished correctly at each side, rather than being cut off arbitrarily at the perimeter.

The main field was made from reclaimed flooring, broken down and individually prepared into the pieces required for the new pattern. A handmade multi-species border was then designed around it, with geometric corner details formed from individually cut components.

The pattern, scale, material, border and timber combination were therefore all developed specifically for this room. From the original sketch through to the finished floor, it was made by hand from scratch rather than adapted from a standard manufactured design.

This project involved bespoke oak parquet flooring across a Northumberland venue, using oversized blocks to suit the scale of the interior and a handmade multi-species border to define the perimeter.. The border design had been developed previously for another bespoke floor and was chosen again here because the proportions and timber combination worked particularly well alongside the larger parquet.

The detailing was then adapted to suit the room itself. Where the floor met a curved step, the border was not stopped or squared off. Instead, the individual bands were formed through the curve so the border continued around the radius as part of the same design. That allowed the perimeter detail to follow the architecture of the room rather than interrupting it.

The parquet, border and curved sections were therefore considered together rather than as separate features, giving the floor a more continuous and deliberate finish while reworking an established border design within a completely different layout.

View the Northumberland parquet project →

This medallion was designed as an individual feature within the floor rather than selected from a manufactured range. The design and timber combination were chosen specifically for the project, using oak for the star and walnut around the perimeter to create a clear contrast against the surrounding oak herringbone.

Every section was made individually. The components were cut from solid timber, worked to the required angles and assembled piece by piece to build the repeating geometry of the star. Once the oak section had been completed, the walnut outer field was added and the assembled medallion was then routed and refined into its final circular form.

The completed piece was set into the floor as part of the installation rather than added afterwards. This allowed the position of the medallion, the direction of the surrounding herringbone and the proportions of the feature to be considered together from the outset. The floor was then sanded and finished as one continuous installation.

Borders do not always need to stop square where the architecture changes. They can be formed around curved walls, steps, newel posts and other shaped features so that the perimeter detail follows the architecture rather than interrupting it.

The radius, width and proportions of the border are developed around the individual floor and the feature it needs to follow. That can mean anything from a tight curve around a newel post to a continuous border following a large sweeping wall or curved step. These details are designed as part of the wider installation rather than added as a separate feature.

Hand-scraping is used where a floor needs more texture and natural variation than a uniformly sanded surface. Each board is worked by hand to introduce subtle changes in the face of the timber, following the grain rather than creating a repeated manufactured texture.

The amount of character can be controlled depending on the room and the finish being used. It works particularly well where new timber needs to feel less uniform, or where the floor is being designed to sit naturally within an older property. Colour and oil finishes can then be used to emphasise the grain and the variation created by the hand-scraped surface.

Bespoke wood flooring can be developed around the room, the architecture or an entirely new design. If you have an idea in mind, or a space that needs something beyond a standard flooring layout, we can discuss the timber, pattern, proportions, borders, colour and finish with you.